Probable IPhone 7 Rumors

Based on pass release dates, the IPhone 7 is expected to be released on the 19th of September, 2016.

1. No Headphone Jack

"According to Apple Insider, Apple has patented a new slimmer headphone jack technology called D Jack, which has a diameter of just 2mm."
The reason behind Apple removing the headphone jack is not to piss off the consumers, but to make the phone better. No headphone jack means more space for more hardware. Apple is known to piss people off by getting rid of, or changing parts the consumers has grown accustom to (like they did with the IPhone 5 charging port). If this rumor is true, this means more money out of your pocket to buy the beats headphones that can connect into the charging port to listen to music, or Bluetooth headphones. Just know if you decide to upgrade, you'll have to flush your old no longer compatible accessories down the toilet and buy new ones.

Well then how do you expect me to tune out the rest of the world and resign in my bliss of ignorance one may ask. Apple is rumored to be releasing an adapter head that plugs into the USB lighting port which allows you to plug your headphones into that.

Removing the headphone jack also allows the phone to be much thinner than last years IPhone 6s.

3. Dual Rear facing Cameras

This rumor is believed by many to be most likely true but I'm not buying it. Even though I'm a huge Apple fan, I don't believe they intend to make their phone look this bad ass.

The second camera will help you see more color dynamics and it will also give you the option to record 4k videos at 60fps. This means smoother looking slow mos, and some other cool features that ties in to having two cameras.

Last but not least.

2. Waterproof 

I'm not sure if they plan on making the IPhone 7 waterproof or water resistant but either way this is something to be exited about. Most of the high end phones of 2015 are rated IP67, this means they can survive being submerged in a meter of water for about 30 minutes before it gives.

The IPhone 7 is rumored to be rated at IP68, if this is true, it will be the first phone to posses that feature. IP68 means the phone can be dropped in a body of water as deep as 300 meters, and should be able to survive for an infinite amount of time.

And that's it guys. Hope you enjoyed this segment. Wanna hear me talk about something? Let me know in the comments down below. It does not have to pertain to technology, although this one did.
Peace.

Possible specifications:
-Headphone Jack Removed
-Dual Rear-Facing Cameras
-Waterproof
-Force Touch
-Reversible Charging
-E-Sim

Subscribe To My YouTube For More Updates:
https://goo.gl/NkG4i7

#iPhone #iPhone7 #iPhone5SE #IPhone7Rumors #IPhone7Leaked #BendjiD #GetFixed #Apple

The Red Light Of Death - How To Fix It

This video was requested by Tashaun Cantrell who wrote

"I have a Zte Zmax, I need help

Ok when I put the charger in it keeps blinking over and over, is there a way I

can fix it bruh." Today we're going to learn the name of the problem you're

experiencing and how to fix it. This issue is very common and it is known as

The Red Light Of Death. You still receive notifications, your phone rings when someone calls you, you still

have the attributes of a properly working phone but the screen is completely black out.

This happens because the pre limited binary factors of the device is pushing at

intervals with intertwined with one another causing the capacitor to push more

power than its program to. Everything I just said in that sentence is utter

bullshit I just did that to prove my next point. Life lesson number one. Be careful of the

people trying to make everything sound so complicated, for example let's

say a doctor who is prescribing you medicine. The one who is honest to god

trying to help you will make everything simple and understandable, whereas the

bullshitter that just wanna take your money they're gonna to be using advanced

vocabulary words that only 3% of the world knows. They're up to no good 

and on most occasions that medicine will fix one issue, and create another one that's like

twenty times worse. same goes for the technicians. Say you go to a phone place to

get a screen repair and then they open up your phone and say " The conductive wiring in the ABC chip gotta be

replaced by the 123 LMNOP. What The Fuhh?

If they're using complicated sentences like that to make you feel stupid,

Then they're only trying to grab your wallet and slip out $100 bills. The people who keeps

things simple and make sure you really understand what they're trying to say are

the ones who really do want to help you they're genuine.

Let's get back on topic. So the first thing you want to do is complete the power off the

device. You know the phone is off completely when the LED indicator stops blinking.

Now simultaneously hold the volume up and power button, the moment the phone

vibrates let go of the power button while still hold the VOLUME up. If your phone powers on,

Then great. I want you to do this next to make sure that the problem does not

occur again for a long time in the future. If you follow my step accordingly then

you should end up on this screen with this green Android guy. Use the volume

buttons to navigate through this menu, click the volume down button until you reach

Wipe Cache Partition, hit the power button to click it. At the bottom of the

screen in yellow text it'll say wiping cache, formatting cache. And than once again hold

power volume and volume up key simultaneously. Once you feel it vibrate this time let go of both buttons. Let me know in the comments below

how it worked out for you. If this method didn't work there's a likely chance that

you or someone else dropped this phone. Go into a well lit environment and examine the LCD

panel located under the glass screen to see if there are any hairline cracks.

And that should be it Tashuan.

If this video helped you in anyways be sure to give it a thumbs up. Questions or suggestions for any future videos, leave'um in the comments below.

If you would like anymore videos like this from me, hit that Subscribe button and I'll see you in the next one.

New year new breeze, same grass old trees. Do something to help somebody. 

Anyways guys, Bendji D. here from Get Fixed and I'm out. Peace.

At the bottom of the screen in yellow text it'll say, wiping cache, formatting cache . Count ten seconds then once again hold the power and volume up key simultaneously. The phone will restart and once you feel it vibrate this time let go of both buttons.

If this method didn't works, there's a likely chance that you or someone else dropped this phone.
Go into a well lite area and examine the LCD panel located under the glass screen to see if there are any hairline cracks.

New year, new breeze, same grass, old trees. Do something to help somebody.

820-3209 Macbook logic board tries to turn on but fails entering s0 state

alright so today we're going to go over any 20 30 2009 it doesn't turn on so

0:04

today I want to show you how it's really important to know where the original

0:07

damage occurred so that you can figure out problems that would otherwise be a

0:10

complete utter nightmare so when you look at the actual machine itself you're

0:15

going to see that there are these little marks and they look like pidgin little

0:19

stains of pigeon shit that you would see on the sidewalk and if you look at it

0:22

under the microscope you gonna see this really helpful if the board is cleaned

0:25

before you look at it and have no idea where the original damage occurred so

0:29

when I look at it under the microscope which is getting focused so I have some

0:32

here and that's the pigeon shit looking stuff that I'm talking about and then I

0:36

really made when I am interested in is this one right over here so what I do is

0:40

a look at the I'm gonna do them in a look at the motherboard in those spots

0:44

are again this is a board that was fully cleaned before I got it so it's great

0:48

because I don't actually waste time ultrasonic in dealing with all that ship

0:51

but the downside is I don't know where the actual problem is and it's it's

0:56

gonna take a lot of inspection so but knowing without was gonna do something

1:00

to match up the little spot of pigeon shit on the board with this and what I

1:04

see is this and you can see you can you tell it it's this is something that I

1:08

would miss going over the board of my side probably never ever see this but

1:11

now it's really obvious that there's a problem here with this I see so what I'm

1:21

gonna do here's I'm going to go over to the boys your software and we're gonna

1:23

check out on the board via software what that is and what that does when I go to

1:28

the bushes software what I see is getting back into view this body

1:33

software is crap sure any of you have been doing this fully aware that the

1:37

stuff is garbage

1:39

see i dont give a fuck about your birthday so crappy screens go I go

1:46

Pacman this morning as I usually am so many of you 7100

2:02

this program is sucking more than usual which is people five year so I knew 7100

2:08

so this chip you 7100 here this trip is responsible for creating an S O

2:12

PowerShell of PPV ccsa underscore sooo underscore wreck so let's just see where

2:18

this is responsible for so this is created by you 7100 look it goes to our

2:28

7142 no real idea so let's see I'm here where that goes of course not found

2:37

probably called something else on here

2:43

prices will be getting some addicts says that you should find that I seventy 140

2:50

so let's see what that is over here that looks like a current sensing resistor

2:54

for this ok so they call it something different over here go fucking figure

2:59

looks like something goes to the CBO yes you could see or hear that this is

3:11

pretty much used for the CPU now the problem here is 11 SRL that's that i'm

3:17

gonna take a wild guess that has a real is missing because that ship is actually

3:21

burns so you only go back to you 7100 on the schematic you'll see that you 7100

3:25

that pin pin that's burned is one of the VCC pins over here that's required for

3:31

this trip to actually turn on and this chip is used to control this buck

3:36

regulator which is going to take buck converter technically which is going to

3:39

take this higher power over here people use in soo VCC si whatever and it's

3:45

going to turn that into this PPV ccsa also read rail take a look at where that

3:51

comes from so this comes round PPV blah blah computing I sense that comes from

3:56

people but she three hard as you can see so let's say we just take this is the

4:00

rail that's a subway love this one we take that real and we see that that real

4:04

is actually has a summary of this one doesn't have high side computing I

4:14

sounds the same sure that it really is the same shit like this is the same as

4:20

this which is the same as this so if this thing does it takes a point four

4:23

bolts fix a point for all concerned that and whatever voltage the CPU once again

4:28

we can take a wild guess that PowerShell is missing because he is the one that's

4:32

very that's a VCC pin as explained that other videos the VCC pin the VDD pinned

4:36

via Pin whatever that is

4:38

think of that like the pins on the back of your soldering station where you plug

4:43

the icy court in to turn it on so this is where you're expecting power input

4:47

and power inputs not there for the first thing I want to do here as I want to see

4:50

is the board actually in in a state and as for state and its five-state what

4:55

power status so sooo is again keep in mind all these qualify by seven Series

5:00

MacBooks their design turned on from the second to put the charger so as soon as

5:04

i plug the charger in I should it should turn on the fans it's been a should

5:08

start seeing as all rails become president 2012 see what state I'm in and

5:11

work my way down so what I'm gonna do over here is gonna see if I haven't SRL

5:15

present let's go back here and this search for that search RPP 5 ESO and see

5:20

where that shows up because that isn't SRL 55 underscore a so let's see if

5:27

there's any easy places to measure the side not much in terms of easy places to

5:31

murder is just downright awful alright so we're gonna measure for BB 5 vs oh

5:40

and here's a good space to measure for it

5:50

here so now the board is plugged in it's not on could see its dead

5:59

you have a life but it's not actually powering so I'm gonna do is get a

6:02

measure the voltage on PPV 50

6:18

I was there are 500 this means of the machine is here's the good thing it's

6:23

really hard to get some things like let's say p.m. sleep best for L which is

6:27

what gets the machine you know into an s4 s3 state it's really hard to get

6:31

stuff like that going when it's not there that can be a real pain in the ass

6:34

that can be a lot of different things and it's very often at be quite honest a

6:38

total nightmare but this it's ninety-nine percent of its already there

6:41

you have a green light the SMC is going to do what it's supposed to you have

6:45

your steady esta 5 rails as three rails and that's out so again that the

6:49

machines gonna be a next five state then when you gonna try to answer industries

6:53

they were to sleep and that is going to try to answer an SOS state which is on

6:57

and I'm working you don't know what that is Google up our state of a computer as

7:00

five other offer hibernate a story is to spend sleeping like a little white light

7:06

blinking on the frontier MacBook after you close the lid it's it's not off but

7:09

it's not on either and you have always wanted to actually on the 99% the hard

7:13

stuff here again it's done I got a light I have my main power rails and they're

7:17

all I'm missing is I'm gonna take a wild guess the CPU is missing in the end I'm

7:22

not going to do a lot of research to figure it out I'm not even gonna bother

7:25

measuring the rail gonna do it I'm going to do the things that I can do my brain

7:28

off now one of the things I talked about is knowing when to have your brain

7:34

turned off so you can kind of save it for the other stuff so you can use your

7:38

brain a kind of try to figure out what's wrong with this and go through every

7:41

single round the sequence or you could just go there is a big blocks of green

7:45

stuff over here use your brain just enough to try to figure out that where

7:49

that is on this board look and see that there's nothing on the store that's

7:53

burned that lets that's just go over what parent and also what that tells me

7:58

since that P five years over pin is burned that means that anything else

8:02

that's going to be on the PPF IV underscore soo bus may be burnt so let's

8:06

say our place then they get their real but something else is wrong I'm gonna

8:09

look for things that are powered off the people five years of us but i can assume

8:12

here that the pee pee five-year so when high for a second so maybe instead of

8:16

being 503 679 for a split second and that's what caused it to blow up as a

8:20

result of the liquid so let's start with this and if this doesn't work we're

8:23

going to look at the other things in the P five years so busted could be wrong so

8:27

I go into the microscope turn on the soldering station

8:31

reworked machine and let's get started so this is my chip

8:47

get that thing heated up it takes second for the hilarity it up you know they are

8:53

far at all I want is a new anymore and I'm gonna get myself you don't her

8:57

boards one or two distinct is the one that I think out of the business missing

9:01

anything that I need moseley's donor boards are missing everything that I

9:06

need they've even thoroughly thoroughly sodomized

9:19

actually almost every single one of them is missing the things that only stations

9:26

which means I could turn on the film extractor I think tonight if you're

9:34

doing any other type of work I know it's annoying have this thing on it is very

9:36

loud you can hear it in these videos because they use as a tow bar X for the

9:41

removal of the noise you can hear a little bit of it but you can hear all of

9:43

it and i also microphone really close to my mouth so the reason I have this Mike

9:47

really close to my mouth said you can hear just how loud a lot of the stuff is

9:51

so I can actually provide instruction during the video but this thing is

9:55

annoying as hell but as annoying as it is the alternative which is inhaling

10:01

fumes all day is really a really really bad alternatives

10:27

standardized and also going to try to scratch away a lot of that corrosion

10:38

here

10:48

try to do both at the same time they got some quality and text box to stem check

10:53

and see the 559 v2 TAF and let's see what we can do here so I'm gonna try to

11:02

remove the halls of the old livery saw your ad leaded solder and also kind of

11:08

scrape away at the corrosion all at the same time we have a little bit of an

11:13

ambitious task in the other end of the eye on the kind of this little gentle

11:23

scraping it seems like the bottom of that is too far burnt renny general

11:29

scraping to do anything as you can see I have scraped away at the entire trace

11:33

and I haven't made any progress at all and they're now I'm gonna try scraping

11:40

away with the micro pencil

12:13

the other year there was like forbes in Iraq the whole idea behind the forbes in

12:23

a row is that it's pissed off that I didn't buy the FM 2003 and I understand

12:28

it pissed off that I didn't buy the FM 2003 I get that but I also don't give a

12:32

shit fuck you I'm not giving more money when I can literally hang the stuff I

12:37

gotta get right now I have a little screw it in my wall and now screw it

12:42

ever and I coil up my old on the other iron may put a right behind it was time

12:47

to use this plugin right I'm gonna sound really dumb while it was a practical

12:54

board repair school just has the FM 2003 and these other irons are you switch one

12:59

on and which one off and he doesn't really have a regular set up for it it

13:03

says yes and deep so one of the things I was talking about my reviews of the

13:06

other half year was how annoying a lot of the interface is on a lot of these

13:10

products and again like on this alarm clock in nineteen eighties alarm clock

13:14

interface that's really really really just not user intuitive at all and she

13:20

has once again it says snd and like sometimes you just want to hold down the

13:25

button to switch between them I don't know if you're supposed to if you hold

13:30

down the button you press it twice you present ones I can tell when the ship on

13:34

or off because again there's one number on the screen is off to the left and the

13:37

right eye on who the fuck knows the JBC station is very very simple it shows you

13:41

which iron what temperature which I is at you know it makes sense to hack 01

13:46

does not make sense so what I do is think as I could spend more money on the

13:53

head coach station has dual port for its not make sense or I could use my

13:58

existing station and do what works for me which is the plug that shit you know

14:03

just plug the INM and then I'm done with it I unplug that I and i plug my other

14:09

island which is hanging right behind it on the wall the other benefit of this is

14:13

that it takes up a lot less space and where I work so if I want to show you

14:17

where I work

14:18

know the microscope out of the way the microscope this turns out the table so

14:25

this is my hot air station this is my soldering iron this is my best and I

14:32

don't have space for two stands if I put a stand here and I'm of the microscope

14:35

the bars gonna hit if I try to put another stand here it's going to fall

14:38

off because hacker doesn't make your flat anymore why they don't make your

14:42

flat anymore is beyond me this thing being flat is if I had the new fr 810

14:46

the station would not work if they understand it this being flat may be

14:50

able to put this on top of this is the only reason that this works when you

14:53

look at the heck ofr attend the new one which I will never ever recommend you

14:56

buy just just based on the fact that they've made it not slack really thats

15:00

that it's that important I can you can't stack I need my workspace I have a 20

15:05

square foot office when I do over here as you can see is Ivan little now I'm

15:08

also gonna move back so you can see it and my iron is right behind me so you

15:13

know what I want to switch now that paying an extra one or two or three

15:16

hundred bucks tradition station bullshit I literally just unplug and plug it back

15:20

in and I know when it's on

15:22

I know what temperature is that when it's on I don't have to deal with the

15:25

alarm clock bullshit tell you it's small detail from the actual video back to our

15:33

regularly scheduled programming before I decided to bitch about a co and their

15:36

interfaces at a hair so I saw what I did there is a jumper wire because as you

15:44

can see the pad was there in the past was simple but the problem that the

15:48

problem with that pat is that it wasn't actually connected to the trace so if I

15:51

were decided that I would have never gotten people five-year so so what i did

15:55

i did leave a little bit of the pad there was leaving a little bit of the

15:58

pad their means when I hit the send to the wire to get rid of that little

16:00

excess water that I C after the flux

16:09

Spencer what's going to happen is not get a jump away from them so does the

16:15

day if that was inside over there that just came right off with it so now I'm

16:19

ready to put another chip on so I mean

16:21

go to my daughter board that actually still has that ship

16:32

and adorable that I took the job offer there actually is a chip that is more

16:38

burns in the one that I'm currently working with are you kidding me let's

16:42

see what does it look like

16:46

missing her bad fact that there is this bush yeah yeah and I do next

16:56

the sport as a whole and then obviously the reason it has a hole in it is

16:59

because I didn't know that they could fix the SOL for the CPU the Americas

17:04

boards that I look at where like it has a hole in it but I know the original

17:09

problem was fixable is getting higher and higher I mean if this had been given

17:19

to me I would have fixed

17:27

these may be serious all the homeboys have a destroyed CTV car circuit I gotta

17:34

find people and offer them like a group rate or something on the on the training

17:41

class yes you do these people would be rich if they weren't throwing the strap

17:45

in the garbage I don't understand why you throwing us away after 1530 box you

17:53

selling it for 169 a 250 or so what's really still has put in a hole through

18:08

as if you didn't put the whole through though this would be a problem to begin

18:10

with when you alright so let's remove that chip from the donor board fume

18:23

extractor over some blocks down there is going to be over here on the desk so I

18:32

moved the fume extractor over and fucks on it

18:58

director of activity here

19:03

traded this chip doesn't run away while I changed open broadcaster back to the

19:07

microscope better not flying mayor filter

19:34

doing theirs we push down on the board that's important if it's natural and the

19:39

Board may contact and this one won't work then I'm gonna go around it with my

19:47

grandparents were going to make sure that they actually started on their

19:51

properly

19:58

individual join as I go

20:21

down there

21:22

so much reflection

21:30

you know become clear to see once a used their wanna make sure my jumper is in

21:36

place so I'm gonna do as I'm gonna hold the jumper properly so that it doesn't

21:42

move away or stick to my on Saturday directly to the chipping and I really

21:46

want to make sure that that jumper is straight to my chip

21:57

that ship is going be be five years

22:25

ok now first thing I want to do as I want to see if there's any change so

22:30

that issue and let's see if I have any any any positive results so plugin

22:48

as you can see which resists tion for time on mister is looking good so I'm

23:04

pretty sure that means all of the car and the air so let's go over this again

23:09

the whole idea here is that when you look at the axis is why having the whole

23:12

computer is really ask for from people saying stuff we're seeing the entire

23:16

computer allows me to do this diagnosis have a commentary while half asleep and

23:22

instill fix the board inside of 20 something minutes whereas without that

23:27

it would take a lot longer if it took a lot longer would mean lower priority

23:30

lower priority means lower turnaround insist you know this makes everything

23:35

that much easier it's that much simpler so a lot of people think is a genius is

23:40

really does mean having some common sense and following along and looking

23:43

through to see what it is that was wrong and just based on where the damage was

23:48

and then again I can come up with a serious what happen based on that so

23:52

something like this is kinda what tells me that in soo rail being not present

23:58

will keep it from turning on but it can still enter it as a state so like a few

24:01

years ago at the center the knowledge base I know that this board is internet

24:05

it can be an SL stadium or the rail missing it's not going to just jump back

24:08

to a nest restate its everything's gonna turn on except for that one well it is

24:12

kinda learn this stuff just from just poking around looking at stuff that

24:15

otherwise would have looked at but yeah okay so what I said about how the fans

24:20

been so I should be good to go right I completely missed the entire backlight

24:27

section of the motherboard none of which was actually working so let's just take

24:32

a look here and so yeah so we have this which trace we have this line that comes

24:42

here for backlight enable this is what we actually worked on

24:47

that was for the CPU power we have gets it gets better so the LCD connector was

24:56

missing tends to reinforce they usually burned here they were actually

24:59

completely hundred-percent missing so that was that was some fun right there

25:05

right over here so that's where it's going to the backlight enable resistors

25:16

that is that new backlash use that back light fuse is going to this resistor

25:21

which is responsible for the voltage dividers gonna send power to dissolve

25:24

machine this this was this was fucked and now it is slightly less fucked which

25:32

which is a good thing actually be good to go because I know one thing's for

25:42

certain I am NOT spending another second on this